$ 34.19 — or subscribe to save 10%
When your Amara View cushion starts to leak or feel uncomfortable, therapy consistency suffers. This genuine replacement cushion restores the mask’s dependable seal and soft contact so you can get back to effective treatment without replacing the entire mask system.
The cushion uses Philips’ liquid silicone rubber (LSR) material for a soft, flexible interface that supports the nose from underneath rather than covering it. This under-the-nose design helps reduce bridge-of-nose irritation and preserves the Amara View’s signature open field of view. Installation is straightforward: remove the worn cushion, align the new one, and press into place.
Available in Small, Medium, and Large to match your existing Amara View frame. This cushion is compatible only with the Amara View Full Face CPAP Mask and will not fit other Philips Respironics or third-party masks.
Note: This is a replacement cushion only. The Amara View mask frame, headgear, headgear clips, elbow, and short tube are sold separately.
Liquid Silicone Rubber (LSR) — Soft, flexible material conforms gently to your face for comfortable contact that helps maintain a stable seal through the night.
Under-the-Nose Design — Supports the nose from below rather than covering it, reducing bridge-of-nose pressure and irritation common with traditional full face cushions.
Open Field of View — The cushion’s low profile works with the Amara View’s forehead-free frame to keep your sightline completely unobstructed for glasses, reading, or TV.
Three Size Options — Available in Small, Medium, and Large to match your existing Amara View mask frame for a precise, intended fit.
Press-Fit Installation — Aligns and presses into place on the Amara View frame for quick, tool-free cushion swaps at home.
| Specification | Details |
|---|---|
| Manufacturer | Philips Respironics |
| Product Type | Replacement Full Face Mask Cushion |
| Material | Liquid Silicone Rubber (LSR) |
| Sizes Available | Small, Medium, Large |
| Small Part Number | 1090692 |
| Medium Part Number | 1090693 |
| Large Part Number | 1090694 |
| Compatible Mask | Amara View Full Face CPAP Mask |
| Tax Category | CPAP Replacement Supplies |
| Billing Code | A7031 (Full Face Cushion) |
Compatible with:
Not compatible with:
Sizing:
Daily Cleaning: Wash the cushion with mild soap and warm water. Rinse thoroughly and air dry away from direct sunlight. Do not use antibacterial soap, alcohol, or bleach.
Replacement Schedule: Replace every 3 months, or sooner if you notice:
Installation: Remove the worn cushion from the Amara View frame. Align the new cushion and press firmly into place until secure.
Do Not:
Liquid silicone rubber provides a softer, more flexible contact surface than standard silicone. It conforms gently to your face and helps maintain a stable seal without requiring heavy headgear tension.
The cushion supports your nose from below, completely avoiding the bridge. No red marks across the top of your nose, no pressure points where traditional full face masks dig in.
When leaks start creeping in, a fresh cushion is usually all you need. Press-fit installation means you can swap in a new one in seconds and get back to leak-free therapy the same night.
The Philips Respironics Amara View Full Face CPAP Mask only. It is not compatible with the standard Amara, DreamWear, or any other mask.
Small, Medium, and Large. All three sizes fit the single universal Amara View frame.
Every 3 months, or sooner if you notice persistent leaks, visible wear, loss of flexibility, or discoloration.
Liquid silicone rubber (LSR), which is softer and more flexible than standard silicone for a gentler contact surface.
No. This is a replacement cushion only. The frame, headgear, clips, elbow, and short tube are sold separately.
Remove the worn cushion from the frame, align the new one, and press firmly into place until it’s secure. No tools required.
Use the Amara View sizing gauge, which measures the depth of your nose to determine the correct size. If you’re replacing an existing cushion, choose the same size you currently use.
Wash daily with mild soap and warm water. Rinse thoroughly and air dry away from direct sunlight. Do not use antibacterial soap, alcohol, or bleach.
No. The Amara View and standard Amara are different masks with different cushion designs. This cushion fits only the Amara View.
The Amara View mask system is not made with natural rubber latex or DEHP, as stated in the Amara View user guide.
14+ years of sleep apnea expertise serving patients throughout the United States. Work closely with our sleep specialists to get personalized care and comfort.
$ 1, 011.75
$ 1, 092.50
$ 912.00
$ 1, 021.25 — or subscribe to save 10%
$ 1, 053.55
$ 1, 053.55
$ 953.80
Federal law requires we have a valid prescription before this product can be shipped.
Don’t have a prescription? Order our Home Sleep Test to see if you qualify.
Already have a prescription? Great. You can upload it after checkout.
Need to renew your prescription? No problem, please check out prescription renewal option here.
