$ 32.30
The Headgear for AirFit F30 Full Face Mask is a genuine ResMed replacement headgear assembly designed to restore comfortable, stable support for the AirFit F30 Full Face CPAP Mask. Over time, headgear stretches and loses elasticity, leading to mask shifting, air leaks, and the need to overtighten, which can cause red marks and pressure points. Replacing the headgear restores a secure fit without replacing the entire mask.
Made from soft, flexible materials including nylon, elastane, polyurethane, and polyamide, the straps gently contour to your face while maintaining a steady hold throughout the night. The plush construction helps minimize pressure points and red marks for more comfortable nightly wear.
The headgear features a one-size-fits-all design with easy Velcro adjustments, eliminating sizing guesswork. Magnetic headgear clips (included) make connecting and disconnecting from the AirFit F30 mask frame quick and simple, so you can remove the mask without disturbing your strap settings.
This is a replacement headgear assembly only. The AirFit F30 mask frame, cushion, elbow, and short tube are sold separately.
This is the replacement headgear assembly only. The AirFit F30 mask frame, cushion, elbow, and short tube are sold separately.
Soft, Flexible Materials: Made from nylon, elastane, polyurethane, and polyamide, the straps gently contour to your face and help reduce pressure points and red marks during nightly wear.
Magnetic Clips for Easy On/Off: Polycarbonate clips with metal-plated magnets snap onto the AirFit F30 frame, making it easy to remove and reattach the mask without undoing your strap adjustments.
One-Size-Fits-All Design: Quick Velcro adjustments eliminate sizing guesswork and let you dial in a secure, comfortable fit for a wide range of head sizes.
Durable Construction: Built for nightly use with materials that maintain their stretch and support over the recommended 6 to 9 month product life.
Simple Weekly Care: Hand wash in warm soapy water once a week, rinse thoroughly, and air dry. No complicated cleaning routines or special products needed.
| Specification | Detail |
|---|---|
| Product Model | AirFit F30 |
| Vendor Product Number | 64161 |
| Headgear Material | Nylon/Elastane, Polyurethane, Polyamide |
| Headgear Clips Material | Polycarbonate and Metal Plated Magnet |
| Size | Standard (One Size Fits All) |
| Product Life | 6 to 9 Months |
| Tax Category | CPAP Replacement Supplies |
| Billing Code | A7035 (Headgear) |
Replace the headgear every 6 to 9 months, or sooner if you notice:
The headgear clips contain magnets that can impact certain implanted cardiac devices, including pacemakers and defibrillators. Keep the magnets at least 50 mm (2 inches) away from any cardiac device. The magnetic field strength is less than 400 mT. Users with medical implants sensitive to magnets should consult their physician before use.
Worn headgear stretches and loses elasticity, causing mask shifting and leaks. A fresh headgear assembly restores the soft, stable support your AirFit F30 needs for a consistent seal without overtightening.
Plush nylon, elastane, and polyurethane straps contour gently to your face, helping reduce the pressure points and red marks that come from worn, stiff headgear.
The included magnetic clips snap onto the AirFit F30 frame for quick mask removal and reattachment without disturbing your Velcro strap adjustments.
This headgear is designed exclusively for the ResMed AirFit F30 Full Face CPAP Mask. It is not compatible with the AirFit F30i, F20, AirTouch F20, F40, or other ResMed mask models.
Yes. The headgear assembly includes the magnetic headgear clips made from polycarbonate with metal-plated magnets for easy connection to the AirFit F30 mask frame.
Yes. The headgear is one-size-fits-all with adjustable Velcro straps that accommodate a wide range of head sizes.
No. This is the replacement headgear assembly only. The AirFit F30 mask frame, cushion, elbow, and short tube are sold separately.
Replace the headgear every 6 to 9 months, or sooner if you notice stretching, loss of elasticity, the need to overtighten, visible wear, or increased mask shifting during sleep.
Hand wash weekly in warm water with mild soap. Rinse thoroughly until all soap residue is removed. Allow to air dry completely before reattaching to the mask. Do not machine wash, tumble dry, or use bleach.
The headgear straps are made from nylon/elastane, polyurethane, and polyamide. The headgear clips are made from polycarbonate with metal-plated magnets.
Yes. The headgear clips contain magnets for easy on/off. The magnetic field strength is less than 400 mT. Users with pacemakers, implantable defibrillators, or other cardiac devices should keep magnets at least 50 mm away and consult their physician before use.
14+ years of sleep apnea expertise serving patients throughout the United States. Work closely with our sleep specialists to get personalized care and comfort.
$ 1, 011.75
$ 1, 092.50
$ 912.00
$ 1, 021.25 — or subscribe to save 10%
$ 1, 053.55
$ 1, 053.55
$ 953.80
Federal law requires we have a valid prescription before this product can be shipped.
Don’t have a prescription? Order our Home Sleep Test to see if you qualify.
Already have a prescription? Great. You can upload it after checkout.
Need to renew your prescription? No problem, please check out prescription renewal option here.
