$ 118.75 — or subscribe to save 10%
The Pixi Pediatric CPAP Mask with Headgear by ResMed is a nasal CPAP mask designed specifically for children aged two to seven years old. Developed in partnership with pediatric health experts, the Pixi is not simply a scaled-down adult mask. It uses anthropometric data on the bone structure, facial characteristics, and skin sensitivity of children to create a mask that minimizes pressure on soft faces while maintaining an effective therapy seal.
The Pixi features a thin, single-wall silicone cushion that is lightweight and gentle, designed to minimize pressure on a child’s face without compromising the seal. The headgear is made from Breathe-O-Prene, a lightweight and breathable material, and is designed to sit away from the eyes and ears to reduce irritation and provide a clearer line of sight. This is reassuring for both the child and the caregiver, who can see the child’s eyes and more of their face during therapy.
The mask offers three headgear adjustment positions (top, side, and bottom) to accommodate the growth of the child and allow fitting from an adult’s point of view. A quick-release latch makes it easy to remove the mask during sleep or routine breaks, and an emergency latch allows even faster removal in an emergency. The Spring-flex lightweight tubing can be attached to either side of the cushion to accommodate different sleeping positions, and it bends and stretches easily to avoid getting caught while the child sleeps.
Thin, single-wall silicone cushion is gentle and lightweight, designed to minimize pressure on a child’s soft face without compromising the therapy seal.
Lightweight Breathe-O-Prene headgear sits away from the eyes and ears to reduce irritation and provide a clearer line of sight for both the child and caregiver.
Three headgear adjustment positions (top, side, and bottom) accommodate child growth and allow caregivers to fit the mask from an adult’s point of view.
Quick-release latch retains headgear settings for easy on and off, with an emergency latch for even faster removal when needed.
Spring-flex lightweight tubing attaches to either side of the cushion for different sleeping positions and bends and stretches to avoid getting caught during sleep.
| Specification | Detail |
|---|---|
| Product Model | Pixi Pediatric |
| Manufacturer | ResMed |
| Part Number | 61030 (Complete System) |
| Replacement Parts | 61033 (Cushion), 61034 (Headgear), 61035 (Frame System) |
| Mask Type | Nasal (Pediatric) |
| Intended Age | Children aged 2 to 7 years |
| Cushion Type | Silicone (Single-Wall) |
| Headgear Material | Breathe-O-Prene |
| Therapy Pressure | 2 to 30 cm H2O |
| Dead Space | 101.7 mL |
| Sound Level | 40.6 dBA (sound power), 32.6 dBA (sound pressure at 1m) |
| Latex/PVC/DEHP | Free of natural rubber latex, PVC, DEHP, and phthalates |
| Warranty | 90-Day Manufacturer Warranty |
| Product Life | 6 – 12 Months |
| Billing Code | A7034 (Mask) |
The Pixi Pediatric CPAP Mask is designed for use with standard CPAP and Bi-Level devices prescribed for children aged 2 to 7 years. The mask connects to standard CPAP tubing via the swivel at the end of the short tube assembly.
The Pixi is compatible with most CPAP and bilevel machines from all manufacturers. The mask should only be used with CPAP or bilevel devices recommended by a physician or respiratory therapist.
Replacement parts available separately include the cushion (part number 61033), headgear (61034), and frame system (61035).
Important Safety Notes:
– The mask must be used under qualified supervision for patients who are unable to remove the mask by themselves.
– If prescribed for children with serious congenital conditions or cognitive impairments, using a device with appropriate alarms is recommended.
– High headgear tension may lead to facial deformities with long-term use. Regular clinician review of growth patterns and use of different mask styles is recommended.
Keep the Pixi Pediatric mask clean and safe for your child with regular care.
Daily Cleaning:
1. Disassemble the mask components.
2. Hand wash all parts in warm water (approximately 30 degrees C / 86 degrees F) with mild soap.
3. Clean the vent holes with a soft-bristled brush to ensure they remain clear.
4. Rinse thoroughly under running water.
5. Allow all parts to air dry completely out of direct sunlight.
Important: Do not use scented solutions, bleach, alcohol, or antibacterial soap, as these can damage the silicone cushion.
Recommended Replacement Schedule:
– Cushion: every 1 to 3 months
– Headgear: every 3 to 6 months
– Complete Mask: every 6 to 12 months
Replace components sooner if you notice visible wear, reduced seal, or the child experiences discomfort. Always ensure all vent holes are clean and clear before each use.
Developed in partnership with pediatric health experts using anthropometric data on children’s bone structure, facial characteristics, and skin sensitivity. The Pixi is not a scaled-down adult mask, but a purpose-built pediatric interface.
A quick-release latch makes it easy to remove the mask for nighttime breaks while retaining headgear settings, and an emergency latch allows even faster removal in urgent situations for caregiver peace of mind.
The thin, single-wall silicone cushion minimizes pressure on soft faces, while the headgear sits away from the eyes and ears to reduce irritation and provide a clear line of sight for both child and caregiver.
The Pixi Pediatric CPAP Mask is designed for children aged 2 to 7 years who have been prescribed CPAP or bilevel therapy for the treatment of sleep apnea.
No, the Pixi was specifically designed for children using anthropometric data on children’s bone structure, facial characteristics, and skin sensitivity. It is purpose-built to minimize pressure on soft faces and accommodate the unique needs of pediatric patients.
The quick-release latch allows caregivers to remove the mask quickly during sleep or for routine breaks. It retains the headgear settings so you do not need to readjust each time. An emergency latch releases even faster for urgent situations.
Yes, the Spring-flex lightweight tubing can be attached to either side of the cushion to accommodate the child’s preferred sleeping position. The tubing bends and stretches easily to avoid getting caught during sleep.
No, the Pixi mask system does not contain natural rubber latex, PVC, DEHP, or phthalates.
The Pixi operates within a therapy pressure range of 2 to 30 cm H2O, compatible with both CPAP and bilevel devices.
The Pixi is compatible with most CPAP and bilevel machines from all manufacturers using standard tubing connections. It should only be used with devices recommended by a physician or respiratory therapist.
ResMed recommends replacing the cushion every 1 to 3 months, the headgear every 3 to 6 months, and the complete mask every 6 to 12 months. Replace sooner if you notice visible wear or reduced seal performance.
Replacement parts available separately include the cushion (part number 61033), headgear (61034), and frame system (61035).
Yes, a valid prescription is required before the Pixi Pediatric CPAP Mask with Headgear can be shipped, as it is a prescription medical device.
14+ years of sleep apnea expertise serving patients throughout the United States. Work closely with our sleep specialists to get personalized care and comfort.
$ 1, 011.75
$ 1, 092.50
$ 912.00
$ 1, 021.25 — or subscribe to save 10%
$ 1, 053.55
$ 1, 053.55
$ 953.80
Federal law requires we have a valid prescription before this product can be shipped.
Don’t have a prescription? Order our Home Sleep Test to see if you qualify.
Already have a prescription? Great. You can upload it after checkout.
Need to renew your prescription? No problem, please check out prescription renewal option here.
