Price range: $ 20.90 through $ 23.75
The Swivel for Fisher & Paykel Masks is a replacement swivel connector that attaches at the end of the mask elbow where the CPAP hose connects. Designed to provide a greater range of motion, the swivel rotates freely to reduce tubing drag and tension on the mask, helping active sleepers maintain a comfortable seal as they change positions during the night.
Over time, the swivel can develop wear, become stiff, or crack, which may restrict rotation and increase tubing pull on the mask. Replacing a worn swivel helps restore smooth, unrestricted movement between the hose and mask, reducing the chance of mask displacement and air leaks caused by tubing tension.
This product is available in two versions to fit different Fisher & Paykel mask models. The first version (400FPH241) is compatible with the Eson 2 Nasal Mask, Brevida Nasal Pillow Mask, and Vitera Full Face Mask. The second version (400HC570) is compatible with the Eson Nasal Mask and Simplus Full Face Mask. Make sure to select the correct type for your specific mask.
This is the swivel connector only. The mask frame, cushion, headgear, elbow, and CPAP tubing are sold separately.
Smooth 360-Degree Rotation: The swivel provides free rotation between the CPAP hose and mask elbow, reducing tubing drag and tension on the mask for more comfortable therapy during sleep.
Two Compatible Versions: Available for two groups of Fisher & Paykel masks, ensuring the correct fit whether you use an Eson 2, Brevida, Vitera, Eson, or Simplus mask.
Restores Freedom of Movement: A worn or stiff swivel can restrict rotation and pull on the mask during position changes. Replacing it helps restore smooth movement and reduces mask displacement.
Durable Construction: Built to withstand nightly use with reliable materials that maintain smooth rotation over time.
Easy Replacement: The swivel snaps on and off the mask elbow without tools, making replacement quick and straightforward.
| Specification | Detail |
|---|---|
| Vendor Product Number | 400FPH241 (Eson 2, Brevida, Vitera), 400HC570 (Eson, Simplus) |
| Tax Category | CPAP Replacement Supplies |
| Billing Code | E1399 (Misc. Product) |
The two swivel versions are not interchangeable. Make sure to select the correct type for your specific mask model. Using the wrong swivel may result in a poor connection and air leaks.
The manufacturer recommends washing the swivel daily in lukewarm water with mild soap for no more than 10 minutes. Rinse thoroughly with fresh water until all soap residue is removed. Allow the swivel to air dry away from direct sunlight before use.
Replace the swivel when you notice any of the following:
To replace the swivel, simply disconnect the old swivel from the mask elbow by pulling it free, then push the new swivel onto the elbow until it clicks securely into place. Connect the CPAP hose to the other end of the swivel.
A worn or stiff swivel restricts the free rotation between your CPAP hose and mask, increasing tubing pull and the chance of mask displacement. A fresh swivel restores smooth, unrestricted movement.
Choose the right swivel for your mask: one version fits the Eson 2, Brevida, and Vitera, while the other fits the Eson and Simplus. Both restore the reliable connection your mask needs.
The swivel snaps on and off the mask elbow in seconds with no tools required. Disconnect the old one, push the new one into place, reconnect your hose, and you are ready for therapy.
If you use the Fisher & Paykel Eson 2, Brevida, or Vitera mask, select the Eson 2, Brevida, and Vitera Masks option (400FPH241). If you use the Fisher & Paykel Eson or Simplus mask, select the Eson and Simplus Masks option (400HC570). The two versions are not interchangeable.
No. Each swivel version is designed for specific Fisher & Paykel mask models and they are not interchangeable. Using the wrong swivel may result in a poor fit, air leaks, or an inability to connect properly to the mask elbow.
The swivel is the rotating connector between your CPAP hose and the mask elbow. It allows the hose to rotate freely so that tubing movement does not pull on or displace the mask. This is especially important for active sleepers who change positions during the night.
Replace the swivel if rotation becomes stiff or restricted, if you notice visible cracks or discoloration, if there are air leaks at the connection point, or if the swivel no longer connects securely to the mask elbow or CPAP hose.
Disconnect the old swivel from the mask elbow by pulling it free. Push the new swivel onto the elbow until it clicks securely into place. Then connect your CPAP hose to the other end of the swivel. No tools are required.
Wash the swivel daily in lukewarm water with mild soap for no more than 10 minutes. Rinse thoroughly with fresh water until all soap residue is removed. Allow it to air dry away from direct sunlight. Do not use bleach, alcohol, or harsh chemical cleaners.
No. This swivel is designed exclusively for specific Fisher & Paykel CPAP masks. It is not compatible with masks from ResMed, Philips Respironics, or other manufacturers.
No. This product is the swivel connector only. The mask elbow, frame, cushion, headgear, and CPAP tubing are sold separately.
14+ years of sleep apnea expertise serving patients throughout the United States. Work closely with our sleep specialists to get personalized care and comfort.
$ 1, 011.75
$ 1, 092.50
$ 912.00
$ 1, 021.25 — or subscribe to save 10%
$ 1, 053.55
$ 1, 053.55
$ 953.80
Federal law requires we have a valid prescription before this product can be shipped.
Don’t have a prescription? Order our Home Sleep Test to see if you qualify.
Already have a prescription? Great. You can upload it after checkout.
Need to renew your prescription? No problem, please check out prescription renewal option here.
