$ 38.95 — or subscribe to save 10%
Leaks and pressure marks can derail CPAP therapy. The ResMed Dual-Wall Spring Air Cushion for the Mirage FX Nasal CPAP Mask replaces a worn cushion to restore a secure, gentle seal so you can stay asleep and on treatment.
Designed for the Mirage FX frame, this replacement cushion pairs a soft inner wall with a supportive outer wall using ResMed’s patented Spring Air technology. The cushion is filled with air on the inside to be lightweight and less bulky, while the outer membrane seals against the skin and the inner cushion rests comfortably on your face. A soft-touch frost coating ensures optimal pressure distribution and increased comfort at the nasal bridge.
The dual-wall design helps stabilize the seal with light contact during therapy, meaning fewer leak interruptions without the need to overtighten your headgear. Simply swap the old cushion for a fresh one to make your Mirage FX feel renewed in minutes.
Available in Small, Standard, and Wide sizes, all fitting the Mirage FX frame. The Standard size works with both the Mirage FX and Mirage FX for Her masks. Replace every 3 to 6 months for optimal seal performance and hygiene.
Dual-Wall Spring Air Technology — Patented design pairs a soft inner wall with a supportive outer wall, creating a stable seal with light contact that reduces leak interruptions without overtightening.
Soft-Touch Frost Coating — Special surface coating ensures optimal pressure distribution and a softer feel against the skin, reducing irritation at the nasal bridge.
Lightweight Air-Filled Design — The cushion is filled with air on the inside to be lightweight and less bulky, making it comfortable for extended wear throughout the night.
Easy Replacement — Simply remove the old cushion from your Mirage FX frame and press the new one into place until seated. No tools required, and your mask feels renewed in minutes.
Genuine ResMed Quality — Direct replacement cushion manufactured by ResMed specifically for the Mirage FX and Mirage FX for Her Nasal CPAP Masks.
| Specification | Detail |
|---|---|
| Manufacturer | ResMed |
| Part Numbers | 62136 (Small), 62111 (Standard), 62125 (Wide) |
| Materials | Silicone cushion with Nylon |
| Coating | Soft-touch frost coating |
| Latex-Free | Yes |
| Available Sizes | Small, Standard, Wide |
| Replacement Schedule | Every 3–6 months |
| Tax Category | CPAP Replacement Supplies |
| Billing Code | A7032 (Mask Cushion) |
Compatible Masks:
Not Compatible With:
Notes:
Daily Cleaning:
What to Avoid:
When to Replace:
Installation: Remove the old cushion from the Mirage FX frame. Press the new cushion onto the frame until it is fully seated. Refit your mask and check the seal at your therapy pressure.
Over time, silicone cushions lose their ability to maintain a quality seal. A fresh Dual-Wall Spring Air Cushion restores the gentle, secure contact that keeps leaks at bay without overtightening.
The patented Spring Air technology uses an air-filled dual-wall structure that’s lightweight and less bulky, with a frost coating that distributes pressure evenly for a softer feel at the nasal bridge.
The Mirage FX has only four parts, making cushion replacement effortless. Pop off the old one, press on the new one, and you’re back to comfortable, leak-free therapy in minutes.
This Dual-Wall Spring Air Cushion is designed exclusively for the ResMed Mirage FX Nasal CPAP Mask and the ResMed Mirage FX for Her Nasal CPAP Mask. It is not compatible with any other ResMed or third-party masks.
The cushion is available in three sizes: Small, Standard, and Wide. All sizes fit the same Mirage FX frame. The Standard size works with both the Mirage FX and Mirage FX for Her masks.
Dual-Wall Spring Air is ResMed’s patented cushion technology that uses two walls: a soft inner wall that rests comfortably on your face and a supportive outer wall that seals against your skin. The cushion is filled with air on the inside, making it lightweight and less bulky while providing a stable seal with light contact.
Replace the Mirage FX nasal cushion every 3 to 6 months for optimal seal performance and hygiene. Replace sooner if you notice cracks, tears, loss of elasticity, discoloration, or persistent leaking despite headgear adjustments.
Yes. The Dual-Wall Spring Air Cushion for Mirage FX is latex-free, made from silicone and nylon materials.
Remove the old cushion from your Mirage FX frame by gently pulling it away. Press the new cushion onto the frame until it is fully seated. Refit your mask and check the seal at your normal therapy pressure.
The frost coating is a special surface treatment on the cushion that ensures optimal pressure distribution and provides a softer, more comfortable feel against the skin, particularly at the sensitive nasal bridge area.
Remove the cushion from the frame daily. Wash with warm water and mild soap, rinse thoroughly, and allow to air dry completely. Give the cushion a firm shake to help dry the inside between the dual walls. Do not use harsh chemicals, bleach, or boiling water.
The ResMed part numbers are: 62136 (Small), 62111 (Standard), and 62125 (Wide).
14+ years of sleep apnea expertise serving patients throughout the United States. Work closely with our sleep specialists to get personalized care and comfort.
$ 1, 011.75
$ 1, 092.50
$ 912.00
$ 1, 021.25 — or subscribe to save 10%
$ 1, 053.55
$ 1, 053.55
$ 953.80
Federal law requires we have a valid prescription before this product can be shipped.
Don’t have a prescription? Order our Home Sleep Test to see if you qualify.
Already have a prescription? Great. You can upload it after checkout.
Need to renew your prescription? No problem, please check out prescription renewal option here.
