$ 6.65 — or subscribe to save 10%
The Headgear Clips for Amara View Full Face CPAP Mask (2 Pack) are the genuine Philips Respironics replacement clips that connect the Amara View headgear straps to the mask frame. These quick-release clips allow you to easily put on and remove your mask without disrupting your headgear strap settings.
Made from durable thermoplastic polyester elastomer, these clips are designed to snap securely onto the Amara View mask frame while providing a quick-disconnect mechanism for nighttime breaks. When you need to get up briefly, simply release the clips and your headgear tension settings stay intact for when you reconnect.
Over time, clips can lose their grip, crack, or become difficult to snap into place. Replacing worn clips restores the secure, reliable connection between your headgear and mask frame that’s essential for leak-free therapy.
This two-pack is designed exclusively for the Philips Respironics Amara View Full Face CPAP Mask. These clips are not compatible with the original Amara mask, Amara Gel mask, or any other Philips Respironics mask model.
Note: These clips contain magnets with a field strength of less than 400 mT. Users with active medical implants should keep the mask at least 6 inches (approximately 15 cm) away from any implanted medical devices.
Quick-Release Design — Snap on and off the Amara View mask frame for easy mask removal during nighttime breaks without losing your headgear strap tension settings.
Durable Material — Made from thermoplastic polyester elastomer for reliable snap connections that withstand nightly use over months of therapy.
Secure Connection — Clips lock firmly onto the mask frame to keep the headgear straps in place and maintain a stable, leak-free seal during sleep.
Genuine Philips Respironics Part — Original manufacturer replacement (Part #1090698, Model HH1228/00) engineered specifically for the Amara View mask frame.
Latex-Free — Made without natural rubber latex for safe use by users with latex sensitivities.
| Specification | Detail |
|---|---|
| Manufacturer | Philips Respironics |
| Part Number | 1090698 |
| Philips Model | HH1228/00 |
| Material | Thermoplastic Polyester Elastomer |
| Contents | 2 headgear clips |
| Dimensions | 1.5″ x 1″ x 0.5″ (per clip) |
| Package Dimensions | 152 x 76 x 1 mm |
| Latex-Free | Yes |
| Magnets | Yes (field strength less than 400 mT) |
| Warranty | 90 days |
| Tax Category | CPAP Replacement Supplies |
| Billing Code | E1399 (Misc. Product) |
Compatible With:
Not Compatible With:
Magnet Safety Warning:
These clips contain magnets with a field strength of less than 400 mT. Keep the mask at least 6 inches (approximately 15 cm) away from any medical implants or medical devices that can be impacted by magnetic fields. This applies to the user, household members, caregivers, and bed partners in close proximity.
Installation:
Cleaning:
When to Replace:
Worn clips can cause unexpected headgear disconnection during sleep, disrupting therapy and breaking your seal. Fresh clips restore the firm, reliable snap that keeps your Amara View mask stable all night.
The quick-release design lets you disconnect the headgear for breaks without losing your strap tension settings. Functioning clips mean consistent nightly fitting with no readjustment needed.
Simply snap the new clips onto the mask frame in seconds. No tools, no complicated assembly, just a quick swap that gets you back to comfortable, uninterrupted therapy.
These headgear clips are designed exclusively for the Philips Respironics Amara View Full Face CPAP Mask. They are not compatible with the original Amara, Amara Gel, or any other mask model.
This product includes two headgear clips (one for each side of the mask frame).
Yes. These clips contain magnets with a field strength of less than 400 mT. Users with pacemakers, ICDs, nerve stimulators, insulin pumps, or other active medical implants should keep the mask at least 6 inches away from any implanted devices and consult a physician before use.
The Amara View headgear clips are made from thermoplastic polyester elastomer, a durable, flexible material that provides reliable snap connections. They are latex-free.
Replace the clips when they no longer snap securely into the mask frame, when the headgear disconnects unexpectedly during sleep, or when you notice visible cracks or material fatigue.
No. The Amara View and original Amara are different mask systems with different clip designs. These clips are for the Amara View only. The original Amara uses talon-style clips.
The Headgear Clips for Amara View carry a 90-day warranty from Philips Respironics.
The Philips Respironics part number for the Amara View Headgear Clips (2 Pack) is 1090698.
14+ years of sleep apnea expertise serving patients throughout the United States. Work closely with our sleep specialists to get personalized care and comfort.
$ 1, 011.75
$ 1, 092.50
$ 912.00
$ 1, 021.25 — or subscribe to save 10%
$ 1, 053.55
$ 1, 053.55
$ 953.80
Federal law requires we have a valid prescription before this product can be shipped.
Don’t have a prescription? Order our Home Sleep Test to see if you qualify.
Already have a prescription? Great. You can upload it after checkout.
Need to renew your prescription? No problem, please check out prescription renewal option here.
